LTR™ / Conventional / Digital * Multi-mode Professional Mobile !
IC-F5063
IC-F6063
VHF
UHF
MOBILE TRANSCEIVERS
Home > Products > IC-F5063 / IC-F6063
Built-in Basic LTR™ Mode Operation
Group, selective and phone calls are available in built-in LTR™ mode. MDC signaling is also available on LTR™ mode.
Optional 6.25 kHz Digital Mode Ready
Optional 6.25 kHz Digital Mode is Available.
Built-in Versatile Tone Signaling
Use the built-in CTCSS, DTCS, 2-Tone 5-Tone or MDC 1200 capability to set up your own talk groups, and have your radio standby quietly when other groups are talking. Up to 10 2-Tone, 8 5-Tone codes can be decoded on a single memory channel.
IP54 Dust-Protection and Splash Resistance (Controller Only)
When used with the optional separation kit, RMK-3, and separation cable, the front panel of the IC-F5061 series can be detached from the main unit. The control head has dust-protection and splash resistance construction equivalent to IP54.
Voting Scan
The voting mode scanning detects the S-meter level of repeater stations and automatically selects the strongest station or the first station to exceed the preset S-meter level, useful for roaming 2 or more repeater sites.
Optional Active Noise Canceling Microphone
The optional active noise canceling microphone HM-211 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.
Other Features
- The mode slave setting automatically selects the scanning list, according to the operating channel
- Nuisance delete
- Built-in inversion-type voice scrambler
- Large dot matrix display and multi-function LCD
- 8 DTMF autodialing memories and ANI function
- D-Sub accessory connector, ignition sensing line and more…
General
| IC-F5063 | IC-F6063 | |||
|---|---|---|---|---|
| Frequency coverage (Varies according to version) | 136-174 MHz | 400–470 MHz | ||
| Number of channels | 512 ch/128 zones | |||
| Channel spacing (Varies according to version) | 12.5/25, 15/30 | 12.5/25 | ||
| Type of emission | 16K0F3E, | 16K0F3E, | ||
| Current drain | Tx High | 14A/7A (50/25W) | 14A/7A (45/25W) | |
| Rx | Stand-by | 300 mA | ||
| Max. audio | 1.2A | |||
| Dimensions (projections not included; W×H×D) | 160×45×150 mm | |||
| Weight (approx.) | 1.3kg; 2.9lb | |||
Transmitter
| IC-F5063 | IC-F6063 | |
|---|---|---|
| RF output power | 25W | |
| Spurious emissions | 75dB (typ.) | |
| Frequency stability | ±1.0ppm | |
| Audio harmonic distortion | 3% typical | |
| FM Hum and Noise | 45dB typ. (W) | |
Receiver
| IC-F5063 | IC-F6063 | |
|---|---|---|
| Sensitivity at 12dB SINAD | 0.25μV (typ. analog), | |
| Adjacent channel selectivity (W/N) | 85/75dB (typ.) | |
| Spurious response rejection | 90dB (typ.) | |
| Intermodulation rejection | 77dB (typ.) | |
| AF output power (at 5% distortion with an 8Ω load) | 4W (typ.) | |
Function Comparison and Internal Unit Options
| IC-F5063 IC-F6063 | ||
|---|---|---|
| Number of option slots | 2* | |
| CTCSS/ DTCS | encoder | Available |
| decoder | Available | |
| 2-Tone | encoder | Available |
| decoder | Available | |
| 5-Tone | encoder | Available |
| decoder | Available | |
| DTMF autodial | Available | |
| DTMF decoder | Available** | |
| Voice Scrambler | Inversion | Available |
| APCO P25 digital | – | |
| AES encryption | – | |
| DES encryption | – | |
| IDAS digital | UT-126H | |
| MPT 1327 | – | |
| MDC 1200 | Available | |
| LTR™ trunking | Available | |
| PassPort | – | |
* One for UT-126H digital unit and one for another option board.
** Possible as a kind of 5-Tone format.
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| IC-F5063/IC-F6063 | 661KB |
| IDAS™ Solutions | 2.43MB |
| MDC1200 | 767KB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| Instruction Manual | IC-F5060 series, IC-F6060 series | |
| Operating guide | IC-F5060/F6060 series (BIIS / MDC / LTR / NXDN operation) |
