Hybrid Handheld IP Radio for Local & Nationwide Communications
IP730D
IP740D
HYBRID
IP TRANSCEIVERS
Home > Products > IP730D / IP740D
Innovative LTE Radios with Licensed Professional Radio Mode for Increased Capacity and Coverage
The IP730D and IP740D are dual mode “hybrid” radios that provide nationwide coverage over LTE networks and conventional VHF/UHF professional radio mode (IDAS™ digital/analog mode).
Dual Mode
The IP730D series can receive both communications from an LTE radio group and IDAS™ or analog group at a time (audio mixed). You can press either the main PTT for LTE or the sub PTT button for IDAS™ or analog channel to answer in accordance with pre-programming. If necessary, you can press the main and sub PTT buttons to address two groups at the same time.
Bridge Function
The Bridge function* relays received IDAS™ digital or analog audio to the LTE radio group, while transferring the LTE radio conversations to the IDAS™ or analog group. This function is useful when communicating outside of the LTE service coverage area with an IDAS™ or analog radio, or temporary cross band connection between two IDAS™ or analog radio groups using different frequencies, channels or modes (IDAS™/analog).
(Analog mode bridge function is available with firmware update (version 1.24 or later).)
* When using the Bridge function, operating time will be shorter and output power of the IP730D/IP740D is reduced to 1 W.
The Bridge function may be prohibited in some countries. Please check the legal requirements in your country before using this function.
LTE Mode
LTE mode provides push-to-talk communication over an LTE (4G) and 3G network*. The cellular network provides coverage into building basements or high-rise floors where conventional radio systems may not reach.
Network coverage is provided by a dedicated data SIM card for secure private communication. Service availability depends on the country.
IDAS™ Mode
IDAS™ digital mode is a conventional VHF/UHF radio mode using licensed professional radio channels. It also provides Individual, Group and All calls with PTT operation. When operating in remote, mountainous areas, 4G/3G networks may not be available. Conventional VHF/UHF communications provide a stable, local alternative.
Sub PTT Button for Dual Mode Operation
The IP730D series has two PTT buttons; the main PTT button and the sub PTT button. You can use one for LTE communication and the other for an IDAS™/Analog channel. The sub PTT button offers smooth switching between talking on LTE and IDAS™/Analog channels.
Simultaneous TalkListen™ Function in LTE Mode
The Simultaneous TalkListen™ function provides full-duplex one-to-many communication in LTE mode which users can talk and receive at the same time like a telephone style conversation.
1500 mW Powerful Audio
Icom’s custom high-power capacity speaker delivers a loud 1500 mW* audio output with improved acoustic sound clarity for noisy environments.
* Typical at 10% distortion.
Built-in Bluetooth® Technology
Bluetooth® Unit*
Built-in Bluetooth® capability provides wireless operation with a Bluetooth accessory. The optional Bluetooth® headset, VS-3 has PTT and programmable buttons.
* Version without Bluetooth® also available. Ask your Dealer for details.
GPS Data Transmission Capability
The IP730D series has a built-in GPS receiver that can automatically transmit position data at programmed intervals*. (LTE or IDAS™ mode)
* GPS mapping software is required separately.
(Not supplied from Icom Inc.)
IP67 Waterproof and Dust-Tight Specification
The IP730D series is durable enough to endure water pressure under 1- meter depth for 30 minutes, and has dust-tight protection. The radio meets MIL-STD-810 specifications.
Emergency Call Features Specification
By holding down the orange emergency button, you can transmit an emergency call. In addition, the radio has three emergency related functions: Man Down, Lone Worker and Motion/Stationary Detection functions. If one of these functions is activated, the radio automatically transmits emergency signals to alert your controller or dispatcher of any potential trouble.
(Common to LTE and IDAS™ mode)
Digital Voice Recording/Playback
The IP730D series can record incoming calls of up to 4 minutes, or a maximum of 10 messages, and the user can check recorded communications.
RoIP Gateway to Link to Other Systems
With the VE-PG4 RoIP gateway, the IP730D series can interconnect with an IP phone and various radio systems including Wi-Fi radio, satellite PTT, LTE, IDAS™ and analog radios.
Other Features
General Features
• 136 – 174, 350 – 470, 400 – 520 MHz versions
• 128 Channels/8 Zones
• Rotary encoder with channel announcement function
• DTMF code transmission with optional DTMF microphone, HM-245T
• Vibration alert function
• Surveillance function
• AquaQuake™ function prevents audio degradation from a water-logged speaker
IDAS™ Operating Mode
• NXDN™ conventional
• NXDN™ multi-site conventional over IP network
• IDAS™ digital simulcast
IDAS™ Digital Functions
• Over-the-Air Programming (OTAP) function updates the radio configuration over the LTE
• Over-the-Air Alias (OAA) displays the caller’s name without programming*1
• Up to 500 ID numbers for IDAS™ mode can be saved in the Call List to show the alias name
• Individual, Group and All calls
• Digital voice scrambler (15-bit encryption, 4-key 56bit DES encryption*2)
• Talk back
Analog Functions
• CTCSS and DTCS
• 12.5 kHz channel spacing
*1 These functions will be available with future firmware upgrades.
*2 Depending on versios
Note for the difference between IP730D/IP740D and IP730D/IP740D Lite
The IP730D/740D uses a closed network provided by dedicated data SIM card and is controlled by the IP5000C system.
The IP730D/IP740D is not compatible with IP730D/IP740D “Lite” radios which uses a generally available data SIM card and is controlled by the IP4000C system.
Bluetooth® connection has not been tested for all Bluetooth® compatible devices with this product. This does not guarantee that all devices will work with this product.
General
| Audio output power | Internal SP (8 Ω load) | 1500 mW typical (10% distortion), 1300 mW typical (5% distortion) |
|---|---|---|
| External SP (8 Ω load) | 1000 mW typical (10% distortion), 650 mW typical (5% distortion) | |
| HM-222H (8 Ω load) | 1500 mW typical (10% distortion), 1300 mW typical (5% distortion) | |
| Operating temperature range | –30 °C to +60 °C, –22 °F to +140 °F | |
| Power supply voltage | 7.5 V DC nominal | |
| Current drain (approximate) | Receive | Max. audio (INT SP) 520 mA, Stand-by 300 mA |
| Transmit | Hi (5 W) 1.8 A | |
| Dimensions (H × W × D; Projections not included) | 140.5 × 61.7 × 42.8 mm, 5.5 × 2.4 × 1.7 in (with BP-303) | |
| Weight (approximate) | 320 g, 11.3 oz (with BP-303) | |
| Bluetooth® technology | Version: 4.2, Output: Class 2, Profile HFP, HSP or Version: 5.3, Output: Class 1, Profile HFP, HSP | |
LTE (4G)/W-CDMA (3G)
| Network | EUR, EXP | LTE (4G): B1, B3, B7, B8, B20 |
|---|---|---|
| USA | LTE (4G): B2, B4, B12 W-CDMA: B2, B5 | |
| AUS, EXP | LTE (4G): B1, B3, B5, B7, B8, B28 W-CDMA: B1, B5 | |
| Rated output power | 0.25 W | |
| Receiver sensitivity (QPSK) | –102 dBm typ. | |
| Compatibility | IP501H, IP503H, IP501M, IP500APP, VE-PG4 | |
IDAS™ digital/Analogue
| IP730D | IP740D | ||
| GENERAL | |||
| Frequency range* (* Depending on the version) | 136 – 174 MHz | 350 – 470 MHz, 400 – 520 MHz | |
| Number of conventional channels | 128 channels /8 zone | ||
| Type of emission* (* Depending on the version) | USA | 11K0F3E (15.0 kHz), 4K00F1E, 4K00F1D (6.25 kHz) | |
| EUR, EXP, AUS | 8K50F3E (12.5 kHz), 4K00F1E, 4K00F1D (6.25 kHz) | ||
| TRANSMITTER | |||
| Output power | (Hi, L2, L1) 5 W, 2 W, 1 W | ||
| Frequency stability | ±1.0 ppm | ||
| Spurious emissions | 90 dB typ. (TIA-603) | ||
| 0.25 μW (≤ 1 GHz), 1.00 μW (> 1 GHz) (EN301 166, EN300 086) | |||
| FM hum and noise (Without CCITT filter) | 60 dB typ. (TIA-603) | ||
| FSK error | 5% max. 1% typ. (EN301 166) | ||
| RECEIVER | |||
| Sensitivity | Digital (1% BER) | –6.5 dBμV emf typ. (0.24 μV typ.) (EN301 166) | –7 dBμV emf typ. (0.22 μV typ.) (EN301 166) |
| Analogue (12 dB SINAD) | 0.22 μV typ. (TIA-603) | 0.17 μV typ. (TIA-603) | |
| Analogue (20 dB SINAD) | –2 dBμV emf typ. (0.4 μV typ.) (EN300 086) | –2 dBμV emf typ. (0.4 μV typ.) (EN300 086) | |
| Adjacent channel selectivity | Digital | 62 dB typ. (EN301 166) | 63 dB typ. (EN301 166) |
| Analogue | 67 dB typ. | 67 dB typ. | |
| Intermodulation rejection | Digital | 76.5 dBμV emf typ. (EN301 166) | 73 dBμV emf typ. (EN301 166) |
| Analogue | 74 dB typ. (TIA-603) 67 dB typ. (EN300 086) | 72 dB typ. (TIA-603) 66 dB typ. (EN300 086) | |
| Hum and noise (Without CCITT filter) | 60 dB typ. (TIA-603) | 60 dB typ. (TIA-603) | |
Measurements made in accordance with 3GPP TS-36, TIA-603, EN300 086 and EN301 166.
All stated specifications are subject to change without notice or obligation.
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| Business Radio Solutions (European Edition) | 5.18MB |
| IP730D/IP740D (A4) | 3.34MB |
| IP730D/IP740D (LT) | 3.31MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| DOC (DECLARATION OF CONFORMITY) | IP730D (Built-in Bluetooth) | |
| DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IP730D (Built-in Bluetooth) | |
| DOC (DECLARATION OF CONFORMITY) | IP730D (Non-Bluetooth) | |
| DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IP730D (Non-Bluetooth) | |
| INSTRUCTIONS (Old Bluetooth Unit version) (Boxed with the transceiver) | IP730D/IP740D | |
| INSTRUCTION MANUAL | IP730D/IP740D | |
| PRÉCAUTIONS (Boxed with the transceiver) | IP730D/IP740D | |
| INSTRUCTIONS (Boxed with the transceiver) | IP730D/IP740D/IP730D Lite/IP740D Lite | |
| DOC (DECLARATION OF CONFORMITY) | IP740D (Built-in Bluetooth) | |
| DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IP740D (Built-in Bluetooth) | |
| DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IP740D (Non-Bluetooth) | |
| DOC (DECLARATION OF CONFORMITY) | IP740D (Non-Bluetooth) |
